To send graphical output to a PostScript file. More...

#include <Fl_PostScript.H>

Inheritance diagram for Fl_PostScript_File_Device:

Public Member Functions
const char *	class_name ()
	Returns the name of the class of this object. More...

void	end_job (void)
	To be called at the end of a print job.

int	end_page (void)
	To be called at the end of each page. More...

	Fl_PostScript_File_Device ()
	The constructor.

void	margins (int left, int top, int right, int bottom)
	Computes the dimensions of margins that lie between the printable page area and the full page. More...

void	origin (int x, int y)
	Computes the page coordinates of the current origin of graphics functions. More...

void	origin (int x, int y)
	Sets the position in page coordinates of the origin of graphics functions. More...

int	printable_rect (int w, int h)
	Computes the width and height of the printable area of the page. More...

void	rotate (float angle)
	Rotates the graphics operations relatively to paper. More...

void	scale (float scale_x, float scale_y=0.)
	Changes the scaling of page coordinates. More...

int	start_job (int pagecount, int from, int to)
	Don't use with this class. More...

int	start_job (int pagecount, enum Fl_Paged_Device::Page_Format format=Fl_Paged_Device::A4, enum Fl_Paged_Device::Page_Layout layout=Fl_Paged_Device::PORTRAIT)
	Begins the session where all graphics requests will go to a local PostScript file. More...

int	start_job (FILE *ps_output, int pagecount, enum Fl_Paged_Device::Page_Format format=Fl_Paged_Device::A4, enum Fl_Paged_Device::Page_Layout layout=Fl_Paged_Device::PORTRAIT)
	Begins the session where all graphics requests will go to FILE pointer. More...

int	start_page (void)
	Starts a new printed page. More...

void	translate (int x, int y)
	Translates the current graphics origin accounting for the current rotation. More...

void	untranslate (void)
	Undoes the effect of a previous translate() call.

	~Fl_PostScript_File_Device ()
	The destructor.

Public Member Functions inherited from Fl_Paged_Device
virtual void	print_widget (Fl_Widget *widget, int delta_x=0, int delta_y=0)
	Draws the widget on the printed page. More...

void	print_window (Fl_Window *win, int x_offset=0, int y_offset=0)
	Prints a window with its title bar and frame if any. More...

virtual void	print_window_part (Fl_Window *win, int x, int y, int w, int h, int delta_x=0, int delta_y=0)
	Prints a rectangular part of an on-screen window. More...

Public Member Functions inherited from Fl_Surface_Device
void	driver (Fl_Graphics_Driver *graphics_driver)
	Sets the graphics driver of this drawing surface. More...

Fl_Graphics_Driver *	driver ()
	Returns the graphics driver of this drawing surface. More...

virtual void	set_current (void)
	Use this drawing surface for future graphics requests. More...

virtual	~Fl_Surface_Device ()
	The destructor. More...

Public Member Functions inherited from Fl_Device
virtual	~Fl_Device ()
	Virtual destructor. More...

Static Public Attributes
static const char *	class_id = "Fl_PostScript_File_Device"

static const char *	file_chooser_title = "Select a .ps file"
	Label of the PostScript file chooser window.

Static Public Attributes inherited from Fl_Paged_Device
static const char *	class_id = "Fl_Paged_Device"

static const page_format	page_formats [NO_PAGE_FORMATS]
	width, height and name of all elements of the enum Page_Format.

Static Public Attributes inherited from Fl_Surface_Device
static const char *	class_id = "Fl_Surface_Device"

Static Public Attributes inherited from Fl_Device
static const char *	class_id = "Fl_Device"
	A string that identifies each subclass of Fl_Device. More...

Protected Member Functions
Fl_PostScript_Graphics_Driver *	driver ()
	Returns the PostScript driver of this drawing surface.

Protected Member Functions inherited from Fl_Paged_Device
	Fl_Paged_Device ()
	The constructor.

virtual	~Fl_Paged_Device ()
	The destructor.

Protected Member Functions inherited from Fl_Surface_Device
	Fl_Surface_Device (Fl_Graphics_Driver *graphics_driver)
	Constructor that sets the graphics driver to use for the created surface. More...

Additional Inherited Members
Public Types inherited from Fl_Paged_Device
enum	Page_Format { A0 = 0, A1, A2, A3, A4, A5, A6, A7, A8, A9, B0, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, C5E, DLE, EXECUTIVE, FOLIO, LEDGER, LEGAL, LETTER, TABLOID, ENVELOPE, MEDIA = 0x1000 }
	Possible page formats. More...

enum	Page_Layout { PORTRAIT = 0, LANDSCAPE = 0x100, REVERSED = 0x200, ORIENTATION = 0x300 }
	Possible page layouts. More...

Static Public Member Functions inherited from Fl_Surface_Device
static Fl_Surface_Device *	surface ()
	the surface that currently receives graphics output

Protected Attributes inherited from Fl_Paged_Device
int	x_offset
	horizontal offset to the origin of graphics coordinates

int	y_offset
	vertical offset to the origin of graphics coordinates

Detailed Description

To send graphical output to a PostScript file.

Member Function Documentation

const char* Fl_PostScript_File_Device::class_name ( )

inlinevirtual

Returns the name of the class of this object.

Use of the class_name() function is discouraged because it will be removed from future FLTK versions.

The class of an instance of an Fl_Device subclass can be checked with code such as:

if ( instance->class_name() == Fl_Printer::class_id ) { ... }

Reimplemented from Fl_Paged_Device.

Reimplemented in Fl_PostScript_Printer.

int Fl_PostScript_File_Device::end_page ( void )

virtual

To be called at the end of each page.

Returns: 0 if OK, non-zero if any error.

Reimplemented from Fl_Paged_Device.

void Fl_PostScript_File_Device::margins	(	int *	left,
		int *	top,
		int *	right,
		int *	bottom
	)

virtual

Computes the dimensions of margins that lie between the printable page area and the full page.

Values are in the same unit as that used by FLTK drawing functions. They are changed by scale() calls.

Parameters

[out]	left	If non-null, *left is set to the left margin size.
[out]	top	If non-null, *top is set to the top margin size.
[out]	right	If non-null, *right is set to the right margin size.
[out]	bottom	If non-null, *bottom is set to the bottom margin size.

Reimplemented from Fl_Paged_Device.

void Fl_PostScript_File_Device::origin	(	int *	x,
		int *	y
	)

virtual

Computes the page coordinates of the current origin of graphics functions.

Parameters

[out]	x	If non-null, *x is set to the horizontal page offset of graphics origin.
[out]	y	Same as above, vertically.

Reimplemented from Fl_Paged_Device.

void Fl_PostScript_File_Device::origin	(	int	x,
		int	y
	)

virtual

Sets the position in page coordinates of the origin of graphics functions.

Arguments should be expressed relatively to the result of a previous printable_rect() call. That is, printable_rect(&w, &h); origin(w/2, 0); sets the graphics origin at the top center of the page printable area. Origin() calls are not affected by rotate() calls. Successive origin() calls don't combine their effects.

Parameters

[in]	x	Horizontal position in page coordinates of the desired origin of graphics functions.
[in]	y	Same as above, vertically.

Reimplemented from Fl_Paged_Device.

int Fl_PostScript_File_Device::printable_rect	(	int *	w,
		int *	h
	)

virtual

Computes the width and height of the printable area of the page.

Values are in the same unit as that used by FLTK drawing functions, are unchanged by calls to origin(), but are changed by scale() calls. Values account for the user-selected paper type and print orientation.

Returns: 0 if OK, non-zero if any error

Reimplemented from Fl_Paged_Device.

void Fl_PostScript_File_Device::rotate ( float angle )

virtual

Rotates the graphics operations relatively to paper.

The rotation is centered on the current graphics origin. Successive rotate() calls don't combine their effects.

Parameters

angle Rotation angle in counter-clockwise degrees.

Reimplemented from Fl_Paged_Device.

void Fl_PostScript_File_Device::scale	(	float	scale_x,
		float	scale_y = `0.`
	)

virtual

Changes the scaling of page coordinates.

This function also resets the origin of graphics functions at top left of printable page area. After a scale() call, do a printable_rect() call to get the new dimensions of the printable page area. Successive scale() calls don't combine their effects.

Parameters

scale_x	Horizontal dimensions of plot are multiplied by this quantity.
scale_y	Same as above, vertically. The value 0. is equivalent to setting `scale_y` = `scale_x`. Thus, scale(factor); is equivalent to scale(factor, factor);

Reimplemented from Fl_Paged_Device.

int Fl_PostScript_File_Device::start_job	(	int	pagecount,
		int *	from,
		int *	to
	)

virtual

Don't use with this class.

Reimplemented from Fl_Paged_Device.

Reimplemented in Fl_PostScript_Printer.

int Fl_PostScript_File_Device::start_job	(	int	pagecount,
		enum Fl_Paged_Device::Page_Format	format = `Fl_Paged_Device::A4`,
		enum Fl_Paged_Device::Page_Layout	layout = `Fl_Paged_Device::PORTRAIT`
	)

Begins the session where all graphics requests will go to a local PostScript file.

Opens a file dialog entitled with Fl_PostScript_File_Device::file_chooser_title to select an output PostScript file.

Parameters

pagecount	The total number of pages to be created. Use 0 if this number is unknown when this function is called.
format	Desired page format.
layout	Desired page layout.

Returns: 0 if OK, 1 if user cancelled the file dialog, 2 if fopen failed on user-selected output file.

int Fl_PostScript_File_Device::start_job	(	FILE *	ps_output,
		int	pagecount,
		enum Fl_Paged_Device::Page_Format	format = `Fl_Paged_Device::A4`,
		enum Fl_Paged_Device::Page_Layout	layout = `Fl_Paged_Device::PORTRAIT`
	)

Begins the session where all graphics requests will go to FILE pointer.

Parameters

ps_output	A writable FILE pointer that will receive PostScript output and that should not be closed until after end_job() has been called.
pagecount	The total number of pages to be created. Use 0 if this number is unknown when this function is called.
format	Desired page format.
layout	Desired page layout.

Returns: always 0.

int Fl_PostScript_File_Device::start_page ( void )

virtual

Starts a new printed page.

The page coordinates are initially in points, i.e., 1/72 inch, and with origin at the top left of the printable page area.

Returns: 0 if OK, non-zero if any error

Reimplemented from Fl_Paged_Device.

void Fl_PostScript_File_Device::translate	(	int	x,
		int	y
	)

virtual

Translates the current graphics origin accounting for the current rotation.

This function is only useful after a rotate() call. Each translate() call must be matched by an untranslate() call. Successive translate() calls add up their effects.

Reimplemented from Fl_Paged_Device.

The documentation for this class was generated from the following files:

Fl_PostScript.H
Fl_PostScript.cxx

Public Member Functions

Static Public Attributes

Protected Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation